Steps to Measure SEG Frames
This page will walk you through on how to properly measure your existing SEG frames for ordering re-prints
Note that this step is not required if you have ordered your frame from us
Measure the frame
Measure the outermost dimensions of
the Silicone Edge Graphic (SEG) frame.
Use the inches side of the tape
measure to record the width from side
to side and height from top to bottom.
Measure the channel
Easiest way for this is to measure the
width & thickness of existing print’s silicone
if available.
or
Measure the frame channel, the groove
around the perimeter of the frame, where
the silicone beading is inserted.
This
thickness varies depending on the frame
manufacturer.
Use the millimeter side of the tape measure
held straight across the channel at any
point.
Send the dimensions
Email the outer frame dimensions (in
inches) and a photo of the frame channel
thickness (in millimeters).
Your order may delay going to production if this info is not received on time.
SEG Measurements
Measuring FAQ's
As your child enters kindergarten, we know that you probably have a lot of questions. We want to make sure that you and your child feel at home here at Webster, so we have come up with a list of the most frequently asked questions about this very important first year of school.
Contact us